GB SSI Magnetostrictive Linear Position Sensor

Brand: Temposonics an Amphenol Company

GB Sensor: Robust, non-contact and wear free, the Temposonics linear position sensors provide best durability and accurate position measurement solutions in harsh industrial environments. 

The position measurement accuracy is tightly controlled by the quality of the waveguide which is manufactured by MTS Sensors. 

The position magnet is mounted on the moving machine part and travels non-contact over the sensor rod with the built-in waveguide. Temposonics GB is a rod-style sensor for installation into hydraulic cylinders, e.g. in power engineering. 

With its flat and compact sensor housing and side-mounted signal connection, the sensor is ideal for small spaces. 

Due to the pressure-resistant sensor rod and its high operating temperature the Temposonics GB sensor is perfectly suitable for use in fluid technology. For improved signal quality the sensor automatically adapts to the strength of the magnet used in the application. 

The set points, start and end position of the measurement, can be modified after installation of the Temposonics GB sensor. Programming can be carried out using the standard connection cable. 

Optionally the sensor offers Bluetooth 1 connectivity for programming. In the case of Bluetooth® connectivity, set points can be modified even when the sensor is no longer accessible. 

The maximum range between sensor and receiver is 5 m (16 feet). With this option it is still possible to program the sensor via the cable connection.

Specifications

Approvals & Certifications

  • ISO 9001
  • EMC Test: Electromagnetic Emission According to EN 61000-6-4, Electromagnetic Immunity According to EN 61000-6-2
  • The Sensor Meets the Requirements of the EC Directives & is Marked with CE

Consumption

  • Current Consumption: 90 mA Typical

Electrical Connectors

  • Cable Outlet
  • M12 (8-Pin) Male Connector
  • M16 (7-Pin) Connector Male
  • Polyurethane (PUR) Cable
  • Silicone Cable
  • Teflon Cable

Electrical Protection

  • Overvoltage Protection: up to 36 Vdc
  • Polarity Protection: up to -30 Vdc

Enclosure, Body Material

  • Sensor Electronics Housing: AISI 303 Stainless Steel 1.4305
  • Sensor Electronics Housing: AISI 316L Stainless Steel, 1.4404

Environmental Protection

  • Ingress Protection: IP67 with Proper Mating Connector
  • Ingress Protection: IP68 for Cable Outlet

Length

  • Stroke Length: 1 to 128” (25 to 3,250 mm)

Linearity

  • ≤ ± 0.02 % of Full Scale (Min. ± 60 µm) Typical

Materials of Construction

  • Sensor Rod: AISI 304 Stainless Steel 1.4307
  • Sensor Rod: AISI 304L Stainless Steel 1.4306
  • Sensor Rod: AISI 316L Stainless Steel, 1.4404

Mounting Position

  • Any Orientation

Operating Pressure

  • psi: 10,153 (kPa: 70,000, bar: 700) Peak (At 10 x 1 Min)
  • psi: 5,076 (kPa: 35,000, bar: 350)

Operating Temperature

  • -40° to 90° C (-40° to 194° F)
  • Option: -40° to 100° C (-40° to 212° F)

Operating Voltages

  • 24 Vdc (-15 / 20 %)

Principle of Operation

  • Magnetostrictive Principle

Repeatability

  • ≤ ± 0.005 % of Full Scale (Min. ± 20 µm) Typical

Resolution

  • Minimum 5 µm

Shock

  • 100 G (Single Shock) IEC 60068-2-27

Vibration

  • 15 G (10 to 2,000 Hz) IEC 60068-2-6

Voltage

  • Dielectric Strength: 500 Vdc (DC Ground to Machine Ground)

show more