Images are representations only.
Rotork K-Tork Range - Pneumatic Valve Actuator
Brand: Rotork PLCK-TORK Actuators and Controls represents the future of valve automation.
The vane actuator is a ‘True Rotary’ actuator that does not require the conversion of a linear motion to a rotary motion.
The result is a simple, highly accurate and reliable quarter-turn pneumatic actuator that is specified for the most demanding process flow control applications.
Features- Available in double-acting or spring-return configurations
- Torque outputs up to 18,300 Nm (155,000 lbf.in)
- Simple, one moving part
- Capable of millions of operations at fast cycle times
- Easy to convert from double-acting to spring-return
- Precise modulating for quarter-turn control valves with accuracy of 0.25% or better
- Low friction, dual opposed lip seals provide extremely long life
- Totally enclosed, non ventilated spring housing
- Conforms to VDI/VDE 3845 control accessory mounting standards
- Fast operation with large ports and no air restrictions
- Complies with ANSI /AWWA C540-02 and C541-08
- Standard 80 to 100° rotation, adjustable
- Certified to IP66M / IP67M and meets NEMA 4/4X
- CE marked and certified in accordance with ATEX 2014/34/EU
- Standard temperature rating -20° to +70° C (-0° to +160° F)
- Working pressure 7 bar (100 psi) or 10 bar (150 psi) rating
- Standard ISO 5211 drive on all spring return models
- Options:
- High temperature (+149° C, +300° F) and low temperature (-40° C, -40° F) options
- De-clutch gear manual override
- ‘RANGER CG’ Corrosion Guard finish
- Integral air fail-safe reservoir
- Full range of open/close, modulating or Bus Network controls
- Retrofit and factory fit linkage kits, valve automation services
- Male shaft adapter for spring-return models
Specifications
Brand
Actuator Torque Output
- Up to 18,300 Nm (155,000 lbf.in)
Rotary Motion
- 90°
Actuator Type
- Vane
Acting Type
- Double-Acting
Operating Pressure
- Sizes KT-02 to KT-06: 2 to 7 bar (30 to 100 psi)
- Sizes KT-10 to KT-70: 2 to 10 bar (30 to 150 psi)
Enclosure
- IP66, IP67
- NEMA 4, NEMA 4X
Approvals & Certifications
- ATEX
- CE
- CSA
- FM
- NAMUR VDI/VDE 3845
Media
- Compressed Air
- Inert Gas
Operating Temperature
- HT: -0° to 300° F (-20° to 149° C)
- LT Version: -40° to 160° F (-40° to 70° C)
Case Material
- LM20 or LM25 Aluminum Alloy (A413 or A356A)
- Zinc
Communication
- DeviceNet
- FOUNDATION Fieldbus
- HArt
- Modbus
- PROFIBUS
Enclosure, Body Material
- A356A Aluminum Alloy
O-Ring Material
- Viton Rubber
Seal Material
- Shaft/Vane Seal: HNBR
- Vane Seal: Polyurethene
Shaft Material
- A217 or 915 Cast Steel
- Spring Shaft: Steel - Electroless Nickel-Plated
Material of Construction
- Assembly Hardware & Stop Bolt: 304 Stainless Steel
- Shaft Bushing: Bronze
- Vane Seal Expander: 304 Stainless Spring Steel
- Vane Seal Side Plate Retainer & Spring: Carbon Steel
Interior, Exterior Finish
- Polyester Epoxy Powder-Coated