Images are representations only.
PDWR Wireless Signal Repeater
Brand: Precision Digital Corporation
PDWR wireless signal repeaters are used to improve the connectivity in PDW30 point to point and PDW90 point to multi-point wireless systems.
They will generally increase signal range of the system by another 1 mile line-of-sight or 500 feet indoor.
The repeaters are simple to install as they only require power and a network ID. Any PDW wireless units in range of the repeater with the same network ID will retransmit through it, thus increasing signal strength.
PDWR repeaters can be used to broadcast over very long distances or around permanent obstacles.
The PDWR repeaters are available in either aluminum or stainless steel NEMA 4X, IP68 enclosures and these enclosures contain plenty of room for field wiring connections.
- Wireless Repeater Unit Improves Signal Strength and Range for PDW Wireless Systems
- Use in PDW30 Point to Point and PDW90 Point to Multi-Point Wireless Systems
- Increase Range an Additional 1 Mile Line-of-Sight, 500 Feet Indoor
- Increases Range of the Analog, Digital I/O and Modbus Signals
- Simple to Configure Using PDW Manager Programming Software and On-Board USB
- Use CapTouch Through-Glass Buttons to Change Network ID
- Device Communication Secured by Enabling 128-bit AES Encryption
- Password Protection
- IP68, NEMA 4X Aluminum & Stainless Steel Enclosures With Plenty of Room for Field Wiring
- Operating Temperature Range: -55 to 75°C (-67 to 167°F)
- Conformal Coated PCBs for Dust & Humidity Protection
- Flange for Wall or Pipe Mounting; Loop for Stainless Steel Tag; Holes for Tamper-Proof Seal
- 9-30 VDC Power
- 3-Year Warranty
Specifications
Display
- 32-character dual-line alphanumeric dot matrix LCD display with backlight
- Visual Area: 2.54" x 0.63" (64.6 x 16.0 mm)
- Character Height: 0.2" (5.5 mm)
- Display used for programming assistance and displaying communications link status and signal strength
Number of Repeaters
- Up to 3 repeaters per system
Programming Methods
- Change network ID and factory defaults only
- Four CapTouch through-glass buttons or PC with PDW Manager software
Power
- 9-30 VDC, 1.0 W maximum
Isolation
- 500 V
Environmental
- Operating: -55° to 75° C
- Storage: -55 to 85° C
- Relative humidity: 0 to 90% non-condensing
Connectors Tightening Torque
- 4.5 lb-in (0.5 Nm)
Material of Construction
- AL Models: ASTM A413 LM6 die-cast aluminum, copper-free, enamel coated
- SS Models: ASTM A743 CF8M investment-cast 316 stainless steel
- Gasket: Fluoroelastomer
- Window: Borosilicate glass
Connections
- Removable screw terminal blocks accept 12 to 26 AWG wire
Mounting
- May be mounted directly to conduit
- Built-in flange for 1.5" to 2" pipe or wall mounting
Communication
- USB 2.0; Micro-USB Type B
Overall Dimensions (W x H x D)
- 5.25" x 11.63" x 4.80" (133 mm x 295 mm x 122 mm)
Weight
- Aluminum: 5.6 lbs (2.5 kg)
- Stainless Steel: 9.8 lbs (4.4 kg)