Images are representations only.
Series 46 Explosion-Proof Pressure Sensor
Brand: ASCO
Specifications
- CSA Approved for use in hazardous areas including:
- CSA 30 (UL1203/FM3615) Class 1 Zone 1 Group IIC
- CSA 30 Class 1 Div 1 Groups A, B, C, D Explosion proof
- CSA 30 Class 2 Div 1 Groups E, F, G Dust Ignition proof
- ANSI/ISA - 12.27.01.2003 Certified "Single Seal" (no need for expensive secondary seal)
- High strength stainless steel construction
- No silicone oil, no internal o-rings, no welds
- Wide operating temperature range
- Ranges from 15 to 20,000 psi (Factory Sealed Gauge)
- Rugged design survives harsh environments
- Compatible with wide range of gases and liquids
- Suitable for high shock and vibration applications
- ABS (American Bureau of Shipping) Approved
Specifications
Brand
Accuracy
- < ± 0.25 % BFSL
- < ± 0.5 % BFSL for 7,500 to 20,000 psi
Stability
- ± 0.25 % of Full Scale
Proof Pressure
- 2X Rated Pressure
- bar: 2 to 2,758
- kPa: 206.8 to 275,800
- psig: 30 to 40,000
Burst Pressure
- 5X or psig: 50,000 (bar: 3,447, kPa: 344,700) whichever is less
- bar: 5.2 to 3,447
- kPa: 517 to 344,700
- psig: 75 to 50,000
Pressure Range
- bar: 0 to 1,379
- kPa: 0 to 137,900
- psig: 0 to 20,000
Case Material
- 304 Stainless Steel
Pressure Cycles
- > 100 Million
Operating Temperature
- -40° to 85° C (-40° to 185° F)
Storage Temperature
- -55° to 105° C (-67° to 221° F)
Compensated Temperature
- 0° to 55° C (30° to 131° F)
Output
- 1-5 V
- 1-6 V
- 4-20 mA
Process Connection
- 1/2" NPT Male
- F250C Female Autoclave
- 1/4" NPT Female
- 1/4" NPT Male
Wetted Materials
- 316L Stainless Steel
- 630 Stainless Steel
- Inconel 718
RFI/EMI Protection
- Yes
Reverse Polarity Protection
- Yes
Electrical Connectors
- Cable with Conduit
Bandwidth (-3 dB)
- DC to 1 kHz
- DC to 250 Hz
Output Noise
- < 2 mV RMS
Shock
- 100 G, 11 ms, 1/2 Sine
Vibration
- 10 G Peak, 20 to 2000 Hz
Span & Zero Effect
- < ± 1.5 % of Full Scale
Zero Offset
- < ± 1 % of Full Scale
Excitation Voltage
- 10-28 Vdc
Output Load
- 0-800 ohms at 10-28 Vdc
- 5,000 ohms min.
Environmental Protection
- IP66
Approvals & Certifications
- ANSI / ISA - 12.27.01.2003 Certified "Single Seal"
- CE
- CSA 30 Class - 1 Div. 1, Grade A, B, C, D & 2 Div. 1, Groups E, F, G & (UL 1203) Class I, Zone 1 Group IIC