MH-Series MT Analog Redundant Absolute, Non-Contact Position Sensor
Brand: Temposonics an Amphenol CompanyThe robust Temposonics MT sensor’s stainless steel housing is designed for direct stroke measurement in compact standard hydraulic cylinders.
MT type sensors are ideal choices for a wide range of hydraulic cylinders. Magnetostrictive displacement sensors, high quality cylinders and precise control valves form ideal driving systems for technically demanding of mobile hydraulics.
Specifications
Approvals & Certifications
- EMC
- ISO 9001 (DQS), ISO 14982 (Agricultural & Forestry Machines), 11452-2 (Radiated Immunity) (Increased Immunity Voltage Output 100 V/m), 11452-4 (Conducted Immunity), 7637-1/2 (Transient Impulses)
- Pressure Impulse Test DIN EN ISO 19879
Electrical Connectors
- Connector System 2 x M12 x 1 with O-Ring 7 x 1.35 mm NBR 70
Electrical Protection
- Overvoltage Protection: 36 Vdc (GND - Vdc)
- Polarity Protection: up to -36 Vdc (GND - Vdc)
Environmental Protection
- IP69K
- Sensor Housing: IP67, EN 60529
- Water-Proof
Flange Material
- Brass Nickel-Plated
Humidity
- Dew Point: 90 % Relative Humidity, Non-Condensing EN 60068-2-30
Hysteresis
- ± 0.1 mm
Linearity
- 2,005 to 2,500 mm: ± 0.08 mm
- 255 to 2,000 mm: ± 0.04 % of Full Scale
- 50 to 250 mm: ± 0.1 mm
Load
- ≤ 250 ohms (12 Vdc) Output
- ≤ 500 ohms (24 Vdc) Output
- ≥ 10 kiloohms mA Output
Materials of Construction
- Sensor Rod: AISI 304L Stainless Steel 1.4306 (Ø 10 mm)
Measuring Range
- 1.96 to 98.4” (50 to 2,500 mm)
Mounting Position
- Any Orientation
O-Ring Material
- NBR
- PTFE
Operating Pressure
- Ø 10 mm Sensor Rod - psi: 5,076 (kPa: 35,000, bar: 350) Nominal
- Ø 10 mm Sensor Rod - psi: 6,527 (kPa: 45,000, bar: 450), Max.
Operating Temperature
- -40° to 105° C (-40° to 221° F)
Output
- 0.25 to 4.75 Vdc
- 0.5 - 4.5 Vdc
- 20-4 mA
- 4.5-0.5 Vdc
- 4.75-0.25 Vdc
- 4-20 mA
Power
- Power Drain: < 1 W
Principle of Operation
- Magnetostrictive Principle
Process Temperature
- -30° to 85° C (-22° to 185° F)
Resolution
- Typical ± 0.1 mm
Shock
- IEC 68-2-27, 100 G, 6 milliseconds Single Hit
- IEC 68-2-27, 50 G, 11 milliseconds at 1,000 Shocks Per Axis
Storage Temperature
- -40° to 105° C (-40° to 221° F)
Supply Voltage
- 12-24 Vdc (Tolerance Range 8-32 Vdc)
Tolerance
- Setpoint Tolerance: ≤ 1 mm
Vibration
- IEC 68-2-6 Ø 10 mm Sensor Rod: 15 G R.m.s (10 to 2,000 Hz)
Voltage
- Electric Strength: 500 Vdc (DC Ground to Machine Ground)
- Mobile