Images are representations only.
Series 9000 High Pressure Control Pinch Valve
Brand: Red Valve Company, IncThe Series 9000 High Pressure Control Pinch Valve is Red Valve’s ANSI Class 300# control valve product.
The heavy-duty elastomer sleeves are reinforced with high strength nylon, polyester fabrics or Kevlar material.
Several heavy-duty sleeve designs are available - standard full-port for on/off isolation applications; double wall for severe abrasive applications; cone, reduced-port and variable orifice designs for control applications.
The elastomer sleeve will close even on solids and the flexing action of the sleeve eliminates the possibility of scaling.
Combining these features with a sealed body design and no packing to maintain results in a simple, rugged, no hang-up, maintenance-free valve.
The Series 9000 is equipped with a heavy-duty solid steel stroke adjustment unit located on the valve base.
This allows the user to fine-tune control or adjust stroke for abrasion sleeve wear.
This flexibility eliminates downtime.
The Series 9000 is available with various actuators.
Bevel gear actuators are available for manual operation.
Hydraulic or electric actuators for automatic operation are also available.
Pneumatic actuators are available on smaller or low pressure applications.
Series 9000 High Pressure Control Pinch Valves are also available in ANSI Class 150 drilling configurations.
Features- Up to 720 psi working pressure
- For on/off or control applications
- Heavy-duty polyester or Kevlar reinforced high-pressure sleeve is the only wetted part
- Extended service life
- Sealed body design
Specifications
Body Material
- Ductile Iron
- 316 Stainless Steel
Sleeve Material
- Pure Gum Rubber, EPDM, Buna-N, Neoprene, Hypalon, Chlorobutyl, Viton
Actuator
- Electric
- Hydraulic
Drilled and Tapped Flange
- ANSI 150#
- ANSI 300#
- ANSI B16.1 125# Cast Flanges
- AWWA C110 125# Flanges
- EN 1092 PN 6, 10 & 16
- JIS 5K, 10K
Port Size
- 1/2” to 10”
Operating Pressure
- 720 psi
Valve Size
- 1” to 12”