Accuracy
- Inherent Accuracy: ± 0.039” (± 1 mm)
- Temperature Accuracy (Analog, HART): ± 0.28° C (± 0.5° F) Range -40° to 105° C (-40° to 221° F)
- Temperature Accuracy (Modbus, DDA): ± 0.1° C (± 0.2° F) Range -20° to 70° C (-4° to 158° F)
- Temperature Accuracy (Modbus, DDA): ± 0.15° C (± 0.3° F) Range 70° to 100° C (158° to 212° F)
- Temperature Accuracy (Modbus, DDA): ± 0.2° C (± 0.4° F) Range -40° to -20° C (-40° to -4° F)
- Temperature Accuracy (Modbus, DDA): ± 0.5° C (± 0.9° F) Range 100° to 105° C (-40° to 221° F)
Approvals & Certifications
- ISO 9001
- ATEX Ex FM14-ATEX-0068X II 1/2 G Ex ia IIC T4 Ta = -50° to 71° C
- CE
- CEC
- EMC EN 61326-1, EN 61326-2-3, EN 61326-3-2, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
- FM (C,US) Class I, Div. 1, Groups A, B, C, D, T4 Class I, Zone 0/1, AEx ia IIC T4 Ta = -50 to 71° C
- IEC Ex FMG 14.0032 II 1/2 G Ex ia IIC T4 Ga/Gb Ta = -50 to 71° C
- NEC
Communication
- Output Signal/Protocol: HART
- Output Signal/Protocol: Modbus RTU
Electrical Connectors
- 180” (4,570 mm) Integral Cable with Pigtail
- 4-Wire Shielded Cable
- 4-Wire Twisted Pair Cable
- Daniel Woodhead 6-Pin Male Connector
- NEMA Typical 4X: 1/2” NPT Female Conduit Opening
- Single & Dual Cavity: 3/4” NPT Female Conduit Opening
- Single & Dual Cavity: M20 for ATEX/IECEx Version
Electrical Protection
- Reverse Polarity Protection: Series Diode
Environmental Protection
- Hazardous Area
- Intrinsically Safe
- IP65
- IP66
- NEMA 4X
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150#
- 2-1/2” (DN 65) - 300#
- 2-1/2” (DN 65) - 600#
- 2-1/2” (DN 65) - PN 100
- 2-1/2” (DN 65) - PN 16
- 2-1/2” (DN 65) - PN 40
- 2-1/2” (DN 65) - PN 64
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
- 2” (DN 50) - 300#
- 2” (DN 50) - 600#
- 2” (DN 50) - PN 100
- 2” (DN 50) - PN 16
- 2” (DN 50) - PN 40
- 2” (DN 50) - PN 64
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150#
- 3” (DN 80) - 300#
- 3” (DN 80) - 600#
- 3” (DN 80) - PN 100
- 3” (DN 80) - PN 16
- 3” (DN 80) - PN 40
- 3” (DN 80) - PN 64
Flange Size - 3/4” (DN 20)
- 3/4” (DN 20) - 300#
- 3/4” (DN 20) - 600#
- 3/4” (DN 20) - PN 100
- 3/4” (DN 20) - PN 16
- 3/4” (DN 20) - PN 40
- 3/4” (DN 20) - PN 64
- 3/4” (DN 20) -150#
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150#
- 4” (DN 100) - 300#
- 4” (DN 100) - 600#
- 4” (DN 100) - PN 100
- 4” (DN 100) - PN 16
- 4” (DN 100) - PN 40
- 4” (DN 100) - PN 64
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150#
- 5” (DN 125) - 300#
- 5” (DN 125) - 600#
- 5” (DN 125) - PN 100
- 5” (DN 125) - PN 16
- 5” (DN 125) - PN 40
- 5” (DN 125) - PN 64
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150#
- 6” (DN 150) - 300#
- 6” (DN 150) - 600#
- 6” (DN 150) - PN 100
- 6” (DN 150) - PN 16
- 6” (DN 150) - PN 40
- 6” (DN 150) - PN 64
Humidity
- 0 to 100 % Relative Humidity, Non-Condensing
Length
- Rigid Pipe: 12 to 300” (304.8 to 7,620 mm)
Materials of Construction
- 316L Stainless Steel
- Epoxy Coated Aluminum
Operating Temperature
- Electronics: -40° to 71° C (-40° to 160° F)
- Sensing Element: -40° to 125° C (-40° to 257° F)
- Temperature Element: -40° to 105° C (-40° to 221° F)
Pressure Range
- bar: 1.724 to 137.9
- kPa: 172.4 to 13,789
- psi: 25 to 2,000
- Vessel Pressure (Rigid Pipe) - psi: 2,000 (kPa: 13,790, bar: 137.9)
- Vessel Pressure (Teflon Pipe) - psi: 25 (kPa: 172.4, bar: 1.75)
Principle of Operation
- Magnetostrictive Principle
Repeatability
- 0.001 % of Full Scale
- 0.015” (0.381 mm) (Any Direction)
Wetted Materials
- 316L Stainless Steel
- Hastelloy C
- Teflon