Images are representations only.
SCH-DGM Pressure Switch
Brand: KOBOLD Instruments, Inc
With few exceptions in the low pressure range, all pressure sensors are equipped with measuring bellows, partly made of a copper alloy but mostly in high stainless steel quality (1.4571).
In comparison with the permissible values, the measuring bellows are subject to low loads and move only slightly. This results in long service life with low switching point drift and high overpressure safety.
The movement of the measuring bellows is also restricted by an international stop so that the forces resulting from the overpressure cannot be transmitted to the switching mechanism.
The parts of the sensor in contact with the medium are welded together without additional materials and the sensors contain no seals.
Cu bellows which are used for low pressure ranges are soldered to the sensor housing. The sensor housing and all parts in the unit in contact with the medium can also be manufactured completely in stainless steel 1.4571 (series DNS).
The individual data sheets contain exact data on materials.
Specifications
Brand
Accuracy
- < 1 % of Working Range
Ambient Temperature Range
- -25° to 60° C (-13° to 140° F)
BSP Connection
- G 1/2" A Male
- G 1/4" Female
Electrical Rating
- 0.3 A at 250 Vdc Resistive
- 5 A at 250 Vac Inductive
- 8 A at 24 Vdc Resistive
- 8 A at 250 Vac Resistive
Enclosure / Body Material
- Sea Water Resistant Aluminum Die Casting GD AI Si 12
Environmental Protection
- IP54
Mounting Position
- Vertical - Upwards or Horizontal
Pressure Range
- bar: 0 to 5
- kPa: 0 to 500
- psi: 0 to 72.52
Set Point Range
- bar: 0.015 to 0.6
- kPa: 1.5 to 60
- psi: 0.218 to 8.702
System Pressure
- bar: 130
- kPa: 13,000
- psi: 1,885