Images are representations only.
R-Series SSI Model RP & RH Magnetostrictive Linear Position Sensor
Brand: Temposonics an Amphenol Company
Temposonics R-Series EtherNet/IP sensors represent MTS Sensors development and product offering in networked position feedback.
EtherNet/IP systems require only a single point of connection for both configuration and control, because EtherNet/IP supports both I/O (or implicit) messages those that typically contain time-critical control data and explicit messages those in which the data field carries both protocol information and instructions for service performance.
And, as a producer-consumer network that supports multiple communication hierarchies and message prioritization, EtherNet/IP provides more efficient use of bandwidth than a device network based on a source-destination model. EtherNet/IP systems can be configured to operate either in a master/slave or distributed control architecture using peer-to-peer communication.
Features- Linear, absolute measurement
- LEDs for sensor diagnostics
- Non-contact sensing technology
- Direct etherNet/IP interface, position & velocity
Specifications
Approvals & Certifications
- CE
- EMC Electromagnetic Emission: EN 61000-6-4, Electromagnetic Immunity: EN 61000-6-2
- IEC 60068-2-27, 60068-2-6
- UL (C,US) 61010-1
Approvals & Certifications
- ISO 9001 (DQS)
Communication
- Data Transmission Rate, Max.
- EtherNet/IP
Current
- Current Drain: 110 mA Typical
Display
- Diagnostic LED Display
Electrical Connectors
- Integral Connector
- M8 4-Pin Male Connector
- Two Female, M12 4-Pin
Electrical Protection
- Overvoltage Protection: up to 36 Vdc
- Polarity Protection: up to -30 Vdc
Enclosure, Body Material
- Sensor Electronics (Profile & Rod Model): Aluminum
Environmental Protection
- IP65 - Model RP
- IP67 - Model RH
Flange Type
- Flat Face (FF)
- Raised Face (RF)
Humidity
- 90 % Relative Humidity, Non-Condensing
Hysteresis
- < 4 µm
Indication
- Red/Green
Length
- Stroke (Profile Style): 1 to 200” (25 to 5,080 mm)
- Stroke (Rod Style): 1 to 300” (25 to 7,620 mm)
Linearity
- < ± 0.01 % of Full Stroke (Min. ± 50 µm)
Materials of Construction
- Sensor Extrusion: Aluminum - Model RP
- Sensor Rod: AISI 304L Stainless Steel 1.4306 - Model RH
Metric Connection
- Threaded Flange M18 x 1.5 - Modle RH
Mounting
- Adjustable Mounting feet or T-slot Nut (M5 Threads) in Bottom Groove - Model RP
- Magnetic Mounting
Mounting Position
- Any Orientation
Operating Pressure
- psi: 10,000 (kPa: 69,000, bar: 690) Peak - Model RH
- psi: 5,000 (kPa: 35,000, bar: 350) Static - Model RH
Operating Temperature
- -40° to 75° C (-40° to 167° F)
Operating Voltages
- 24 Vdc (-15 / 20 %) Nominal
Repeatability
- < ± 0.001 % of Full Stroke (Min. ± 2.5 µm)
Resolution
- 1 to 1,000 µm Selectable
Seat / Seal Material
- Seal: Fluoroelastomer
Shock
- 100 G (Single Hit) / IEC 60068-2-27 (Survivability)
Temperature Coefficient
- < 15 ppm/°C
Torque
- Typical Mounting Torque: 45 Nm (398 In/Lbs) - Model RH
UNF/UNC Connection
- 3/4”-16 UNF-3-A - Model RH
Vibration
- 15 G (10 to 2,000 Hz) / IEC 60068-2-6
Voltage
- Dielectric Withstand Voltage: 500 Vdc (DC Ground to Machine Ground)
- Continuous Operation in Harsh Industrial Conditions
- For Accurate, Simultaneous Multi-Position & Velocity Measurements
- High Pressure Applications