TopWorx Valve Indication-Switch | Enclosure Tropicalized aluminum | Bus/Sensor (2) GO Switches SPDT hermetic seal | Area Classification Explosionproof/flameproof | Visual Display Standard 90? Green OPEN, Red CLOSED | Shaft NAMUR 316 stainless steel | Conduit Entries (2) 3/4"npt | O-Rings Buna-N | Pilot (1) 110Vac pilot, 1.1W, fail OPEN/CLOSED | Spool Valve Aluminum hard coat anodized - ASCO | Valve Cv 1.06Cv (1/4" NPT Ports) | Manual Override Single Pushbutton Momentary/Latching
TopWorx Valve Indication-Switch | Enclosure Tropicalized aluminum | Bus/Sensor (2) GO Switches SPDT hermetic seal | Area Classification Explosionproof/flameproof | Visual Display Standard 90? Green OPEN, Red CLOSED | Shaft NAMUR 316 stainless steel | Conduit Entries (2) 3/4"npt | O-Rings Buna-N | Pilot (1) 110Vac pilot, 1.1W, fail OPEN/CLOSED | Spool Valve Aluminum hard coat anodized - ASCO | Valve Cv 1.06Cv (1/4" NPT Ports) | Manual Override Single Pushbutton Momentary/Latching
Specifications
Brand
Actuator Type
- NAMUR
Applications
- Abusive
- Chemical Compatibility
- Cold Temperatures down to -60° C (-76° F)
- Corrosive
- Explosive
- Hot Temperatures 0° to 80° C (32° to 176° F)
- Wet Applications
Approvals & Certifications
- ATEX
- CE
- EAC
- FISCO
- IEC Ex
- INMETRO
- KOSHA
- NEPSI
- PESO
- UL
Communication
- AS-Interface
- DeviceNet
- FOUNDATION Fieldbus
- HART
- PROFIBUS
Conduit Connection
- 1/2" NPT
- 3/4" NPT
- M20
Enclosure, Body Material
- 316 Stainless Steel
- Tropicalized Aluminum
Environmental Protection
- Explosion-proof Class I, Div. 1, Groups A-D Class I, Div. 2 Groups A-D Class II, Div. 2 Groups F & G
- Flameproof Class I, Div. 1, Groups A-D Class I, Div. 2 Groups A-D Class II, Div. 2 Groups F & G
- Intrinsically Safe Class I, Div. 1, Groups A-D Class I, Div. 2 Groups A-D Class II, Div. 2 Groups F & G
- IP66
- IP67
- Typical 4
- Typical 4X
Flow Rate
- 1.2 Cv
- 3 Cv
Mounting
- Integral Mounting
NPT Connection
- 1/2" NPT
- 1/4" NPT
O-Ring Material
- Buna-N
- Silicone
Output
- 4-20 mA
Switch Type
- DPDT
- SPDT
