ET Start/Stop Magnetostrictive Linear Position Sensor
Brand: Temposonics an Amphenol CompanyRobust, non-contact and wear-free, the Temposonics linear position sensors provide best durability and accurate position measurement solutions in harsh industrial environments.
The position measurement accuracy is tightly controlled by the quality of the waveguide which is manufactured by MTS Sensors.
The position magnet is mounted on the moving machine part and travels contact-lessly over the sensor rod with the built-in waveguide.
Specifications
Approvals & Certifications
- ATEX Ex II 3 G Ex NC IIC T4 Gc, II 3D Ex Tc IIIC T130° C Dc IP66/IP68 -40° C ≤ Ta ≤ 105° C
- CE
Approvals & Certifications
- EMC Electromagnetic Emission EN 61000-6-3, Immunity EN 61000-6-2
- ISO 9001 (DQS)
Cable Material
- Silicone
- Teflon
Communication
- Data Protocol: RS-422
Consumption
- Current Consumption: Max.
Electrical Connectors
- Cable Outlet
Electrical Protection
- Overvoltage Protection: up to ≤ 32 Vdc
- Polarity Protection: up to -30 Vdc
Enclosure, Body Material
- Sensor Electronics: AISI 303 Stainless Steel 1.4305
- Sensor Electronics: AISI 316L Stainless Steel, 1.4404
Environmental Protection
- ATEX [psi: 29 (kPa: 200, bar: 2) at 30 minutes], Non-ATEX: IP68
- ATEX: IP66
Flange Type
- Flat Face (FF)
Humidity
- 90 % Relative Humidity, Non-Condensing
Length
- Stroke Length: 2 to 118” (50 to 3,000 mm)
Linearity
- < ± 0.02 % of Full Scale (Min. ± 60 µm)
Materials of Construction
- Sensor Rod: AISI 304L Stainless Steel 1.4306
- Sensor Rod: AISI 316L Stainless Steel, 1.4404
Metric Connection
- M18 x 1.5-6 G
Mounting Position
- Any Orientation
Operating Pressure
- psi: 0 to 5,076 (kPa: 0 to 35,000, bar: 0 to 350)
Operating Temperature
- -40° to 105° C (-40° to 221° F)
Operating Voltages
- 24 Vdc (-15 / 20 %)
Principle of Operation
- Magnetostrictive Principle
Repeatability
- 0.005 % of Full Scale (Min. ± 20 µm)
Shock
- 100 G (Single Shock) IEC 60068-2-27
UNF/UNC Connection
- 3/4”-16 UNF Male-3A
Vibration
- 15 G (10 to 2,000 Hz), IEC 60068-2-6 (Resonance Frequencies Excluded)
Voltage
- Dielectric Strength ATEX: 700 Vdc
- Dielectric Strength Non-ATEX: 500 Vdc
- Harsh Environments
- Metal Processing